EdX reserves the right to modify these TOS at any time without advance notice
My interest was spiked. It continues:
Any changes to these TOS will be effective immediately upon posting on this page, with an updated effective date. By accessing the Site after any changes have been made, you signify your agreement on a prospective basis to the modified TOS and all of the changes
Aha! Not only do I have to give a carte blanche to whatever they feel like to write in there in the future without telling me, but also after reading the new terms, I already accepted them as I had to access the site to find out about them. Catch 22.
Another glance a bit further down the page, I noticed I had to grant edX a license. Interesting I thought, let’s find out. Anyone remember the hot water Facebook found itself in a while back?
License Grant to edX. By submitting or distributing your User Postings, you hereby grant to edX a worldwide, non-exclusive, transferable, assignable, sub licensable, fully paid-up, royalty-free, perpetual, irrevocable right and license to host, transfer, display, perform, reproduce, modify, distribute, re-distribute, relicense and otherwise use, make available and exploit your User Postings, in whole or in part, in any form and in any media formats and through any media channels (now known or hereafter developed).
Clearly, that’s a lot broader than what’s needed for the operation of the site where users’ comments are shared between other users and instructors.
Baptiste Daroussin started the session with a status update on package building. All packages are now built with poudriere. The FreeBSD Foundation sponsored some large machines on which it takes around 16 hours to build a full tree. Each Wednesday at 01:00UTC the tree is snapshot and an incremental build is started for all supported released, the 2 stable branches (9 and 10) and quarterly branches for 9.x-RELEASE and 10.x-RELEASE. The catalogue is signed on a dedicated signing machine before upload. Packages can be downloaded from 4 mirrors (us-west, us-east, UK, and Russia) and feedback so far has been very positive.
He went on to note that ports people need better coordination with src people on ABI breakage. We currently only support i386 and amd64, with future plans for ARM and a MIPS variant. Distfiles are not currently mirrored (since fixed), and while it has seen no progress, it’s still a good idea to build a pkg of the ports tree itself.
pkg 1.3 will include a new solver, which will help
'pkg upgrade' understand that an old packages needs to be replaced with a newer one, with no more need for
'pkg set' and other chicanery. Cross building ports has been added to the ports tree, but is waiting for pkg-1.3. All the dangerous operations in pkg have now been sandboxed as well.
pkg_tools has been set for September 1st. An errata notice has gone out that adds a default pkg.conf and keys to all supported branches, and nagging delays have been added to ports.
Quarterly branches based on 3 month support cycle has been started on an evaluation basis. We’re still unsure about the manpower needed to maintain those. Every quarter a snapshot of the tree is created and only security fixed, build and runtime fixed, and upgrades to pkg are allowed to be committed to it. Using the MFH tag in a commit message will automatically send an approval request to portmgr and an mfh script on
Tools/ makes it easy to do the merge.
Experience so far has been good, some minor issues to the insufficient testing. MFHs should only contain the above mentioned fixes; cleanups and other improvements should be done in separate commits only to HEAD. A policy needs to be written and announced about this. Do we want to automatically merge VuXML commits, or just remove VuXML from the branch and only use the one in HEAD?
A large number of new infrastructure changes have been introduces over the past few months, some of which require a huge migration of all ports. To speed these changes up, a new policy was set to allow some specific fixes to be committed without maintainer approval. Experience so far has been good, things actually are being fixed faster than before and not many maintainers have complained. There was agreement that the list of fixes allowed to be committed without explicit approval should be a specific whitelist published by portmgr, and not made too broad in scope.
Erwin Lansing quickly measured the temperature of the room on changing the default protocol for fetching distils from
MASTER_SITE_BACKUP from ftp to http. Agreement all around and erwin committed the change.
Ben Kaduk gave an introduction and update on MIT’s Athena Environment with some food for thought. While currently not FreeBSD based, he would like to see it become so. Based on debian/ubuntu and rolled out on hundreds of machines, it now has it’s software split into about 150 different packages and metapackages.
Dag-Erling Smørgrav discussed changes to how dependencies are handled, especially splitting dependencies that are needed at install time (or staging time) and those needed at run time. This may break several things, but pkg-1.3 will come with better dependency tracking solving part of the problem.
Ed Maste presented the idea of “package transparency”, loosely based on Google’s Certificate Transparency. By logging certificate issuance to a log server, which can be publicly checked, domain owners can search for certificates issued for their domains, and notice when a certificate is issued without their authority. Can this model be extended to packages? Mostly useful for individually signed packages, while we currently only sign the catalogue. Can we do this with the current infrastructure?
Stacy Son gave an update on Qemu user mode, which is now working with Qemu 2.0.0. Both static and dynamic binaries are supported, though only a handful of system call are supported.
Baptiste introduced the idea of having pre-/post-install scripts be a library of services, like Casper, for common actions. This reduces the ability of maintainers to perform arbitrary actions and can be sandboxed easily. This would be a huge security improvement and could also enhance performance.
Cross building is coming along quite well and most of the tree should be able to be build by a simple
'make package'. Major blockers include perl and python.
Bryan Drewery talked about a design for a PortsCI system. The idea is that committer easily can schedule a build, be it an exp-run, reference, QAT, or other, either via a web interface or something similar to a pull request, which can fire off a build.
Steve Wills talked about using Jenkins for ports. The current system polls SVN for commits and batches several changes together for a build. It uses 8 bhyve VMs instances, but is slow. Sean Bruno commented that there are several package building clusters right now, can they be unified? Also how much hardware would be needed to speed up Jenkins? We could duse Jenkins as a fronted for the system Bryan just talked about. Also, it should be able to integrate with phabricator.
Erwin opened up the floor to talk about freebsd-version(1) once more. It was introduced as a mechanism to find out the version of user land currently running as
uname -r only represents the kernel version, and would thus miss updates of the base system that do no touch the kernel. Unfortunately, freebsd-version(1) cannot really be used like this in all cases, it may work for freebsd-update, but not in general. No real solution was found this time either.
The session ended with a discussion about packaging the base system. It’s a target for FreeBSD 11, but lots of questions are still to be answered. What granularity to use? What should be packages into how many packages? How to handle options? Where do we put the metadata for this? How do upgrades work? How to replace shared libraries in multiuser mode? This part also included the quote of the day: “Our buildsystem is not a paragon of configurability, but a bunch of hacks that annoyed people the most.”
Thanks to all who participated in the working group, and thanks again to DK Hostmaster for sponsoring my trip to BSDCan this year, and see you at the Ports and Packages WG meet up at EuroBSDCon in Sofia in September.
The DNS Working Group at the FreeBSD Developer Summit at BSDCan this year was off to a good start by noticing that DNSSEC validation could not work on the University of Ottawa’s wireless network. The university’s resolvers added additional records to the root zone, thus failing validation at the root. This led to some discussion on how to provide a user-friendly way to explain this in an understandable way to the user and giver the user a choice of turning off validation or find another network. This certainly is going to be a major problem when turning on validation by default as broken resolvers are very common at hotels, coffee shops, etc. etc.
On a more positive note, all the FreeBSD projects zones are DNSSEC signed and all project-owned servers have SSHFP records in the zone. Dog food was eaten.
Dag-Erling Smørgrav started off by giving an overview of the current state of affairs. ldns and unbound are imported into base in HEAD and 10.x. unbound is meant to act as a local resolver only and as it is not linked to libevent, it will not scale to anything else. For a network-wide resolver or any other configuration, it is recommended to install unbound from ports. DES further went into some of the implementation details on how the base unbound is installed to make sure it does not conflict with an unbound installed from ports.
DES explained some issues he encountered with local and RFC1918 zones which are filtered by default by unbound. Others reported no issues with the right configuration options, so more investigation is needed.
Some people reported having difficulty getting patches accepted upstream by NLNetLabs, which gave some cause for concern as we clearly want a good and active working relationship with our DNS vendor. Others reported no problem working with NLNetLabs, quite the opposite, they are very interested to see the work going on in operation systems, so we’ll just need to build upon that relationship and make sure to invite them to the next WG meeting. Patches that are currently being worked on, DES has some code cleanups, Björn a DNS64 feature, should be submitted through the “normal” submission process and review with NLNetLabs and we’ll see how that goes.
Erwin Lansing started the brainstorm session on future work. Some command line tools would be nice to have; drill does most things one wants, but people are too used to writing dig and dig has many more options; Peter Wemm would like to see contrib scripts line ldns-dane, which are just really easy to use; the control socket should be a unix socket, there’s a patch floating around and should be submitted upstream.
The “Starbucks” problem came up again, with a proposal to turn on
val-permissive-mode by default. Another solution may be by looking at how unbound-trigger does its magic.
After a coffee break, Peter Losher, ISC, went over some of the recent changes at ISC. BIND10 development has been handed over to a new project and ISC will concentrate on BIND9 and a stand-alone project for the DHCP component. BIND 9.10 was recently released and plans are in place for 9.11. ISC is open to suggestions and feature requests.
Peter brought up the topic of clientID for which a IETF draft (draft-edns0-client-subnet) is available. This would help client find the nearest CDN node, etc. ISC wants this to be an opt-out in operating systems as it will peel off a layer of anonymisation, and should be controllable by the user.
Next up was Michael Bentkofsky, Verisign, who, while not involved in the project himself, gave an introduction into the getDNS API, which is a replacement for
getaddrinfo and allows the stub resolver to get validation information down at the client level. It’s available in ports. The discussion went into more of a brainstorm on how applications should get DNS and DNSSEC information and who gets to make decisions about its security. There should be a clear separation between policy and mechanism, where application programmers should not have to worry about this; it should be a system policy. There should be a higher level API where an application basically can ask the operating system for a “connection” and the operation system takes care of everything behind the scenes, DNS, DNSSEC, SSL, DANE, etc. and just return a socket, with some information on how the connection was established and which security mechanisms were used. In FreeBSD, it would make sense to let the Casper daemon hand out the different sub-tasks to ensure all lookups, cryptography, etc. are properly compartmentalised. One potential problem with passing on additional information is that all DNS lookups currently go through
nsswitch, which would need to grow knowledge about that data as well. Are people still using other mechanisms for hostname lookups besides the
hosts file and DNS? We can probably just remove
nsswitch for the hostname lookups.
The session ended with some aims for the 11.0 release. We’ll need to have a wider discussion about the aforementioned removal of nsswitch out of the hostname lookups. We’ll also need a better understanding of what API capabilities applications may need. Can Casper provide all these? Can it run unbound behind the scenes to do all the DNS “stuff” for it? Can we capsicumize unbound and will that be accepted upstream? Enough food for thought and even more for writing code.
Thanks again to DK Hostmaster for sponsoring my trip to BSDCan this year, and see you at the DNS WG meet up at EuroBSDCon in Sofia in September.
For those who haven’t noticed in any of the other media, I attended the ICANN49 conference in Singapore last week. We live in interesting times, with the NTIA announcement taking the spotlight, but lots of developments in (DNS) security and DNSSEC in particular. For now though, here’s some pictures.
As my old PGP key has passed it’s 15th birthday and improvements in cryptology in the meantime, it is about time to roll my key.
The old key is:
pub 1024D/0xAB2F5A5B15256990 1998-07-03
Key fingerprint = FB58 9797 299A F18E 2D3E 73D6 AB2F 5A5B 1525 6990
And the new key:
pub 2048R/0x517BE614A5C1EEC7 2013-09-24 [expires: 2018-09-23]
Key fingerprint = 6AFC 44AA 53E9 82A4 4BC7 1DB7 517B E614 A5C1 EEC7
The new key is signed with the old key, so make sure to check the signatures when importing the new key. The old key will be valid for a while, but I would prefer to use the new key.
For the third year in a row, we’ll be organizing a Vendor Summit during the Developer Summit prior to the EuroBSDCon conference, this year in Malta on September 26 and 27. In previous years, we’ve had a number of presentations by companies, like NETASQ, pfSense and Netflix, on how they successfully built their products and services on top of FreeBSD, and how contributing code back to the community actually can save them money in the long term by reducing internal maintenance costs.
This year, I’d like to change to focus more towards an open discussion between vendors and other large consumers, not only so you can learn from each other, but also so the FreeBSD community can learn more on how their product is used. We’ve long heard that binary packages were the Achilles heal of FreeBSD. Are we on the right track with PKGNG? Java-support is another issue, but is there anything else you are missing that maybe some other company may have an existing solution for they may be able to contribute, but hadn’t thought about anyone else was looking for? Or maybe you have an problem that’s too big for one company to fix, but can be fixed if some of you together fund a project to do so. The FreeBSD Foundation might be able to help.
This is an invitation-only event, please contact me at email@example.com if you would like to attend. If you have anything to present or any topic you would like to discuss, please contact me as well. This will be an informal event, but we welcome a few short presentations.
The FreeBSD project has provided pre-built ready-to-install binary packages for many years on a best-effort basis. While these packages do work in a large number of cases, there are too many inconsistencies and failure combinations, from the unpredictable update frequency to dependency handling across upgrades, for them to be used on a wider scale. After many months of work, we’re nearing a paradigm shift in both the format of the packages, and the building and distribution of the packages with the new PKGNG tools.
At the upcoming Developer Summit at the EuroBSDCon conference in Malta on September 26 and 27, there will be another Ports and Packages Summit, which will center on a round-table brainstorm that begins with a summary of the tremendous progress made in the last 12 months, and closes with a discussion of the roadmap on how to improve binary package creation, distribution, installation and upgrading. Please contact me if you have any topics you’d like to present or discuss. It will be an informal gathering, no formal slides or presentations are required.
As always, the DevSummit is an invitation-only event, so also contact me at erwin@FreeBSD.org if you want to participate.
After reading Jens Rohde’s post listing all his social media and other cloud activities, I thought I’d list mine as well.
- WordPress (self-hosted) for blog and website, and some pictures as well.
- Apache::Gallery (self-hosted) for all kinds of pictures, though not as much recently as I’d like to.
- Twitter: yes, I’m there (and still don’t like them for punishing me with a 6 character minimum username as a first mover).
- Facebook: yup, there as well, but don’t expect me to read it, it’s mostly a passive account.
- Pocket: formerly Read-It-Later, the previous name describes it pretty well; really nice iPad app.
- Newsblur: RSS feeds after Google shut down Reader. Great iPhone/iPad apps. I looked into tt-rss several times to host myself, but last time I looked, it did have a really nice web interface and iPhone web app, but neither of those work great on the larger touch screen on an iPad. A lot of development has happened since, so this may have changed.
Let me end with a shout out to Sparkleshare. Not so much social, but added as a bonus item. While I do use Dropbox as well, mostly for sharing between computers and iPhone/iPad, Sparkleshare is built around git and is independent of where it is hosted. If you want to use a more “cloudy” service, like github, it’s supported, but you can also set up your own server and no longer be bound by space limits (except for the harddisks you buy) or depend on a 3rd party provider with a random server in a random datacenter in some random country governed by a very long EULA and thus a lot more secure for you personal, financial, or otherwise sensitive documents. Unfortunately, no phone or tablet apps. For those without an always-on server somewhere, the Bittorrent Sync, just released in alpha, might be a better alternative.
Which I’m sure they won’t be for a long time after being release into the fields for the first time after a long winter.